Commonly, the typical default gateway IP address of many commercial routers is or But is the sounds familiar to you? Some people might have encountered this IP address, but not as common as those formerly mentioned. Now the obvious question is what makes it different from other typical IP address?

The answer to that question is a basically “Nothing”. It may look different and uses a different number combination but it is just basically the same function as the which is also the default for Century router login IP or the So you can expect that everything you know about handling these common default gateway IP address should still work with the Login Login

Now for those people who are not familiar with things that they can do with their routers like accessing the web page or setup page, here is what this article is all about. If you want to get familiar with your router’s setup page we have prepared some instruction manual to assist you.

How to Log in to

  1. To access your router’s setup page or web user interface, open your web browser. It could just be your native Internet Explorer or the famous Google Chrome.
  2. On the web browser’s address bar, type in the and hit ENTER.
  3. Now a login page will appear. Just type in the username and password provided by your ISP or check the sticker at the back of the router. All the information you need is there. Or you can try typing admin for username and admin or password for password.
  4. That’s it. You can now change the settings of your network. Just note which changes you have made so if something wrong happens, you can always change them back to normal. Or you can always do a full router reset to default factory settings and back to square one.

Why do you need to access the Setup Page?

  • One very good reason why you need to access the router’s setup page is to make the network more secure. Did you know that a lot of apps from Google Play Store the uses the WPS technology can now hack WiFi routers? And those are only possible if you have not changed the default settings of the setup page and your network credentials.
  • Another good reason is to make it more personalized. If you have a neighbor with coincidentally the same router, you would both end up having the same or similar WiFi name. And that could lead to some confusions. So in order to avoid such situation, you should rename your SSID or WiFi network name along with the password as well.
  • Changing the WiFi password to your own preference can also help you access the WiFi network much easier. The default WiFi password is usually a combination of numbers and letters that do not make sense or resembles a word. And that makes it a bit difficult to memorize. Whereas when you use your preferred password, it would be much easier to access the network in case you want to connect a new device or of a guest.
  • In case you had to reset your router, you need the setup page to update all the information like you did when it was new.


There might be some instances where you might not be able to access the setup page of your router via One of the most prominent reason is, you have wrongly entered the IP address. If you do not type the IP address, you will not be allowed to access your router’s setup page.

Another reason could be that your router does not belong to the class range of 192.168.254.x. Which means that is not the IP address assigned to your router. In such cases, you need to search for your router’s IP address to access its setup page.

In order to find out if this is, in fact, the default IP address that your router is using, here’s how to find router’s IP address in Windows computers.

  1. Open the command window by pressing Windows key + R.
  2. On the Run window type in CMD and the command window will show up.
  3. Now type in ipconfig and press ENTER.
  4. Look for the Default Gateway. That is your router’s IP address.

How to use IP address to access your Router’s Configuration Page

  1. Completely power-on your router and wait till it is ready to use.
  2. Connect a device to your router and launch a web browser on it.
  3. Now, go to by typing it on the web browser’s address bar and press ENTER key.
  4. You will now be asked to enter the username and password. To find out the default username and password, check the sticker on the router. It usually is there containing all the default credentials about the router’s network.

Once you are logged into the configuration page, you can make the necessary changes. You can edit the SSID or network name, wireless password, firewall settings and many more.


This is all you need to know about IP address. And how to use it to make the necessary changes in your router’s default setting. If you have any queries regarding this IP address, then do let us know. Just leave your message in the comments section below.

  • Was this Helpful ?
  • YesNo